Return-Path: sales@hyperflight.co.uk
Delivered-To: robin@hyperflight.co.uk
Received: from Neil (emodeler.plus.com [212.159.111.105]) by mail.itpartnership.com
 with ESMTPSA (version=TLSv1.2 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256)
 ; Fri, 10 Apr 2026 18:27:38 +0100
From: <sales@hyperflight.co.uk>
To: <dan.mcg@xtra.co.nz>
References: <0CBA8C1F-3EEC-4B70-B2FB-AE4CBC1ABE5F@xtra.co.nz> <CAEDyXA7Th6eGPxN27NRGY01L_kYXqVRmkoDzAiAFkUuYTEMy1g@mail.gmail.com>
 <CALS97iwFC5ck_ABXsqUf3nkrs8ywp04r2SAQpJ1ns7ea9LNZuw@mail.gmail.com>
In-Reply-To: <CALS97iwFC5ck_ABXsqUf3nkrs8ywp04r2SAQpJ1ns7ea9LNZuw@mail.gmail.com>
Subject: FW: E Kite
Date: Fri, 10 Apr 2026 18:27:41 +0100
Message-ID: <031d01dcc90f$55e18e10$01a4aa30$@hyperflight.co.uk>
MIME-Version: 1.0
Content-Type: text/plain; charset="utf-8"
Content-Transfer-Encoding: quoted-printable
X-Mailer: Microsoft Outlook 16.0
thread-index: AQHlJyBQOS8ca+kljq28kz/hBIcKPAH0w0l/AqieSC21ouUykA==
Content-Language: en-gb
X-ITP: 1 (Sent)
X-hMailServer-LoopCount: 2
X-Priority: 5 (Lowest)

See the manufacturer's answer below.

Regards, Neil

> -----Original Message-----
> From: Andrew Koropatov <koropatov@gmail.com>
> Sent: 10 April 2026 11:01
> To: sales@hyperflight.co.uk
> Subject: Re: E Kite
>=20
> Hello Neil
> I probably didn't understand the question correctly...
> At pages 10-18 are step-by-step instructions about servos mounting and
> wire tensioning. At the page 15-18 you can see that servos are
> accessible after mounting
>=20
> =D1=81=D1=80, 8 =D0=B0=D0=BF=D1=80. 2026=E2=80=AF=D0=B3. =D0=B2 13:42, =
sales@hyperflight.co.uk <sales@hyperflight.co.uk>:
> >
> > Hi Andrew,
> >
> > Can you answer this please?
> >
> > Kind regards, Neil.
> >
> > This message has been dictated to my phone. Please ignore any =
errors.
> >
> >
> > On Wed, 8 Apr 2026 at 10:45, Dan & Joan McGettigan =
<dan.mcg@xtra.co.nz> wrote:
> >>
> >> Hi Neil,
> >> Happy to report my beautiful e kite arrived safely. Have studied =
the assembly
> instructions and wondering how the rudder and elevator wire are =
threaded and tensioned
> as the servo horns are not accessible in the fuse. Do I have to screw =
these servos onto
> tray after it is glued in place? Probably a dumb question, but want to =
get it right=F0=9F=98=A2.
> >> Cheers
> >> Dan