File: D:/downloads/surinder/GSmartControl/ST31000524AS_6VPK7LRB_2015-09-28.txt
smartctl 6.3 2014-07-26 r3976 [x86_64-w64-mingw32-2008r2-sp1] (sf-6.3-1)
Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Seagate Barracuda 7200.12
Device Model: ST31000524AS
Serial Number: 6VPK7LRB
LU WWN Device Id: 5 000c50 04afa322d
Firmware Version: JC4B
User Capacity: 1,000,204,886,016 bytes [1.00 TB]
Sector Size: 512 bytes logical/physical
Rotation Rate: 7200 rpm
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS T13/1699-D revision 4
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Mon Sep 28 11:18:50 2015 GMTDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 600) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 171) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x103f) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 089 082 006 Pre-fail Always - 228143960
3 Spin_Up_Time 0x0003 100 100 000 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 099 099 020 Old_age Always - 1347
5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0
7 Seek_Error_Rate 0x000f 085 060 030 Pre-fail Always - 352568782
9 Power_On_Hours 0x0032 076 076 000 Old_age Always - 21471
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 099 099 020 Old_age Always - 1383
183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0
184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0
187 Reported_Uncorrect 0x0032 001 001 000 Old_age Always - 3951
188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0
189 High_Fly_Writes 0x003a 095 095 000 Old_age Always - 5
190 Airflow_Temperature_Cel 0x0022 071 051 045 Old_age Always - 29 (Min/Max 24/38)
194 Temperature_Celsius 0x0022 029 049 000 Old_age Always - 29 (0 17 0 0 0)
195 Hardware_ECC_Recovered 0x001a 038 016 000 Old_age Always - 228143960
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 21
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 21
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 23825 (173 38 0)
241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 2242160198
242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 2203307827
SMART Error Log Version: 1
ATA Error Count: 3926 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 3926 occurred at disk power-on lifetime: 21464 hours (894 days + 8 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f Error: WP at LBA = 0x0fffffff = 268435455
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
61 00 08 40 c8 c7 4d 00 29d+06:11:08.679 WRITE FPDMA QUEUED
60 00 08 ff ff ff 4f 00 29d+06:11:08.678 READ FPDMA QUEUED
ec 00 00 00 00 00 40 00 29d+06:11:08.591 IDENTIFY DEVICE
00 00 00 00 00 00 00 ff 29d+06:11:08.477 NOP [Abort queued commands]
61 00 08 70 31 df 4c 00 29d+06:11:05.722 WRITE FPDMA QUEUED
Error 3925 occurred at disk power-on lifetime: 21464 hours (894 days + 8 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f Error: WP at LBA = 0x0fffffff = 268435455
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
61 00 08 70 31 df 4c 00 29d+06:11:05.722 WRITE FPDMA QUEUED
61 00 08 d8 6f e5 4c 00 29d+06:11:05.721 WRITE FPDMA QUEUED
61 00 08 80 31 df 4c 00 29d+06:11:05.721 WRITE FPDMA QUEUED
61 00 08 90 6e e5 4c 00 29d+06:11:05.720 WRITE FPDMA QUEUED
61 00 38 e8 cd df 4c 00 29d+06:11:05.719 WRITE FPDMA QUEUED
Error 3924 occurred at disk power-on lifetime: 21464 hours (894 days + 8 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 08 ff ff ff 4f 00 29d+06:11:02.763 READ FPDMA QUEUED
61 00 08 a8 b2 a7 40 00 29d+06:11:02.762 WRITE FPDMA QUEUED
ec 00 00 00 00 00 40 00 29d+06:11:02.718 IDENTIFY DEVICE
00 00 00 00 00 00 00 ff 29d+06:11:02.633 NOP [Abort queued commands]
61 00 08 d8 4c 63 40 00 29d+06:10:59.899 WRITE FPDMA QUEUED
Error 3923 occurred at disk power-on lifetime: 21464 hours (894 days + 8 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f Error: WP at LBA = 0x0fffffff = 268435455
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
61 00 08 d8 4c 63 40 00 29d+06:10:59.899 WRITE FPDMA QUEUED
61 00 08 80 08 66 40 00 29d+06:10:59.898 WRITE FPDMA QUEUED
61 00 08 30 ea 5f 40 00 29d+06:10:59.898 WRITE FPDMA QUEUED
61 00 08 f8 04 66 40 00 29d+06:10:59.898 WRITE FPDMA QUEUED
61 00 08 40 31 c0 41 00 29d+06:10:59.897 WRITE FPDMA QUEUED
Error 3922 occurred at disk power-on lifetime: 21464 hours (894 days + 8 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f Error: WP at LBA = 0x0fffffff = 268435455
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
61 00 08 e8 35 63 40 00 29d+06:10:56.961 WRITE FPDMA QUEUED
61 00 08 b8 5f 43 41 00 29d+06:10:56.961 WRITE FPDMA QUEUED
61 00 08 a0 5e 43 41 00 29d+06:10:56.960 WRITE FPDMA QUEUED
61 00 08 30 8c 4a 43 00 29d+06:10:56.960 WRITE FPDMA QUEUED
61 00 08 38 5d 43 41 00 29d+06:10:56.959 WRITE FPDMA QUEUED
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.